Translate

Tuesday, December 1, 2009

Adding Doors and Windows in Archicad Home Design

Archicad of Graphisoft is a great tool for house design. Architects who have mastered it will definitely recommend it to their friends. This Building Information Modeling software (BIM) is easy to be operated. In addition, Archicad provides various construction elements which home designers can use to accelerate their work. One of the elements is door.


002-small-house-archicad-design.jpg
In Archicad, doors and windows have similar behavior and handling properties. Before we add doors or windows to the floor plan drawing, we must remember that we can only use them if we have drawn walls for them. When we put a door or a window into the wall, Archicad will cut or create an opening into the wall.

To add a door into a wall, click the Door in the ToolBox. Then click the Door Default Settings located below the Toolbar to choose the type of door and to modify it. You can select the types of the doors, change its material or its color.
002-archicad-door-settings.jpg
On the following floorplan view, I have added 4 doors and 7 windows into the walls of the drawing. This is a small house with one bed room, one living room and one toilet room. You can see the floor plan of the house which I have made using Archicad below.
002-archicad-door-window-floorplan.jpg
To visualize the design in 3 Dimensional view, just press Ctrl + F5. The floor plan which I have created is then presented in the following 3D view presentation:
002-3d-view-of-small-house.jpg
It seems that the doors are closed. To change them to be in Open representation, with the doors on the floor plan selected, click again the Door Default Settings. Then click open the Parameters. Activate the 3D representation and change the Opening Angle in 3D to 80 degrees.
002-archicad-door-open.jpg
After you have clicked the OK button, press F3. The 3D representation of the small house is now showing that the doors are open as you can see in the first picture above. by Charles Roring

No comments: